An updated version of the Switch Processor block has been added to the Resources section of the website to download. This block now incorporates a Latched mode – something we’ve previously had as a separate block called ‘Release’.
The Switch Processor is a handy block to put on the output of a switch. It changes the switch signal depending on the mode of the Processor:
- Off – The block has no effect.
- Toggle – Trigger once to switch the output on and again to switch off.
- Latched – Once triggered the output stays on until the Reset port is triggered.
- Timed – Once triggered the output stays on for the duration set (up to 100 seconds).